Wet weather is having a major impact on Southeast Texas, especially over the last few months. Many of us work outside on a regular basis or have to drive to various job sites throughout the workday. This type of rainy weather brings different concerns for safety and driving.
Whether it is raining while you are driving or it has recently rained and the pavement is still wet, extra precaution should be taken while operating a vehicle in these conditions. Unexpected gusts of wind can also make driving more dangerous if the driver is not paying attention. American Automobile Association (AAA) offers some tips for driving in wet weather.
Before You Drive
Safety starts before you drive, and your goal should be to see and be seen. Replace windshield wiper inserts that leave streaks or do not clear the glass in a single swipe. Make sure all headlights, taillights, brake lights and turn signals are properly functioning so other drivers will see you during downpours. Turn on your headlights whenever you drive.
Proper tire tread depth and inflation are imperative to maintaining good traction on wet roadways. Check tread depth with a quarter inserted upside down into the tire groove. If you can see above Washington’s head, start shopping for new tires. Check each tire’s pressure, including the spare, at least once a month… and be sure to check the pressure when the tires are cold.
Avoid Cruise Control
Most modern cars feature cruise control. This feature works great in dry conditions, but when used in wet conditions, the chance of losing control of the vehicle can increase. To prevent loss of traction, the driver may need to reduce the car’s speed by lifting off the accelerator, which cannot be accomplished when cruise control is engaged.
When driving in wet-weather conditions, it is important to concentrate fully on every aspect of driving. Avoiding cruise control will allow the driver more options to choose from when responding to a potential loss-of-traction situation, thus maximizing your safety.
Slow Down and Leave Room
Slowing down during wet weather driving can be critical to reducing a car’s chance of hydroplaning, when the tires rise up on a film of water. With as little as 1/12 inch of water on the road, tires have to displace a gallon of water per second to keep the rubber meeting the road. Drivers should reduce their speed to correspond to the amount of water on the roadway. At speeds as low as 35 mph, new tires can still lose some contact with the roadway.
To reduce chances of hydroplaning, drivers should slow down, avoid hard braking or turning sharply and drive in the tracks of the vehicle ahead of you. Also, it’s important for motorists to allow ample stopping distance between cars by increasing the following distance of the vehicle in front of them and beginning to slow down to stop for intersections, turns and other traffic early.
Responding to a Skid
Even careful drivers can experience skids. If a driver feels their car begin to skid, it is important to not panic and follow these basic steps:
Continue to look and steer in the direction in which the driver wants the car to go.
Avoid slamming on the brakes as this will further upset the vehicle’s balance and make it harder to control. If you feel the car begin to skid, continue to look and steer in the direction you want the car to go. Do not panic, and avoid slamming on the brakes to maintain control.
Overall you want to be extra cautious in wet weather. Slow down, avoid hard braking or turning sharply and allow ample stopping distance between you and the cars in front of you. Also, do these things one-at-a-time. Brake, then turn, then accelerate.
Make it a safe day!